kevintsui

PLEASE FOLLOW THE INSTRUCTION BELOW:

1. Mario Galaxy Jap version with update (don't remove the update), of course for Wii Japan NTSC

2. Download wiikey bootdisc ver 1.9g from www.wiikey.com.cn

3. burn the 1.9g.iso file with imgburn / Alcohol 120%

4. insert the bootdisc into wii, then see the icon as gamecube disc:
- following the instruction, press RESET on your wii to start scanning for the first time
- after scanning, then press RESET to reboot the program
- after reboot, then press RESET to start update the firmware of wiikey
for the whole process, you need to press totally 3 times of RESET button on your wii

5. eject the bootdisc, then insert your Mario Galaxy and start enjoying the game, have fun^^

Sorry don't know Chinese input, someone please translate for me if necessary, thanks!!

kevintsui

日版wii update完日版wiikey 1.9g後可以玩到美版碟,but唔好玩美版mario galaxy
因美版mario galaxy有美版3.0 updater會damage日版機個firmware,會半磚:044:
- 美版機用美版碟update,用美版wii firmware3.0,用美版wiikey firmware 1.9g,玩美版mario galaxy
- 日版機用日版碟update,用日版wii firmware3.0j,用日版wiikey firmware 1.9g,玩日版mario galaxy
- 1.9g for update wiikey, download at www.wiikey.com.cn
- 3.0j for update日版主機,可用日版mario galaxy update

kevintsui

ok no problem if using jap mario galaxy to update jap wii

kevintsui

引用:

原帖由 yeah_eric 於 2007-11-3 06:38 PM 發表
update 完1.9g  之後可以玩 到d咩美版呢
以前的spiderman 3   玩唔玩到架   
隨便一問    最新的火影 http://www.188channel.com/viewthread ... ter%3Dtype%26amp%3B ...

spiderman 3 is a special case, normally about 70-80% of 美版game can play!!
not yet try on火影, cannot answer you

kevintsui

for my experience:

1. i download 日版 mario galaxy from the topic"銀河瑪莉歐 正式日版100% 日版Wiikey可玩了!"
2. insert into my 日版 wii(3.0j), start update, then black screen with "xxxxx001xxxxxxx", my god...半磚???:030:
3. check for solution on uwant, then know about new 1.9g for wiikey:131:
4. immediately download from www.wiikey.com.cn, then burn the iso file with imgburn
5. update the wiikey, then try to play mario galaxy once again:023:
6. yeah...ok wor:036:
7. :098:

kevintsui

引用:

原帖由 nccedu 於 2007-11-3 08:51 PM 發表
日機升了做 3.1J，Wiikey 1.9g beta jap，日版 SMG iso，用 Wii Brick Blocker 更新後變黑畫面！:043: :043: :043:  

real 日版 SMG iso no need to use wii brick blocker wor, only need wiikey 1.9g jap can play for sure

kevintsui

引用:

原帖由 Englishman 於 2007-11-3 07:44 PM 發表


睇完你嘅個案真係覺得莫名其妙? 假日版? 美版就美版, 日版就日版, 硬係唔相信有人會咁無聊整你所謂 " 假日版 " 嚟害人.
其實如其他版友嘅介紹, 用 ISORemover 可以 check 到隻 ...

totally agree with "爬吓文就知點做", it is so important now

kevintsui

引用:

原帖由 阿恒仔 於 2007-11-4 12:41 AM 發表
小弟又有一問...咁update 完wiley 1.9 之後...reboot 完部機..
再入隻mario galaxy 入去 佢仲叫我update " 本人3.0j
應該如何處置?  thx ^_^

if u make sure yourmario galaxy is jap version, then just go ahead for the update, don't worry la

kevintsui

引用:

原帖由 tsang845 於 2007-11-4 11:31 AM 發表
我部機係2.2j,wiikey未update
我想問下,up左1.9b后,仲要唔要up埋隻config 1.3嫁?
只係up1.9g得唔得?定係要兩個都要up晒

config 1.3 no need la, only 1.9g ok