上一頁下一頁
發新話題
打印

[吹水] Wii遊戲吹水區

 
收藏  |  訂閱
510  159.3k

真係好想快d知cyclowiz同wiikey邊隻好d,而家心大心細想即刻改:026:

今日係黃金 X 源 問左
$400,日版,美版,GAMECUBE ,老番
1- 2 hours 就得!

諗住聽日去改左去!^^
ISO 已經準備好!

引用:
原帖由 gekko911 於 2007-3-2 08:47 PM 發表
今日係黃金 X 源 問左
$400,日版,美版,GAMECUBE ,老番
1- 2 hours 就得!

諗住聽日去改左去!^^
ISO 已經準備好!
記住帶私伙碟去試機

回覆 #80 bartt 的帖子

400蚊改機都唔會係新chip,cyclowiz/wiikey 成本都要4x蚊美金:025:

[ 本帖最後由 bele 於 2007-3-2 09:28 PM 編輯 ]

其實係咪好似平時燒落碟度就ok~?
無咩特別野要整?

引用:
原帖由 gekko911 於 2007-3-2 09:30 PM 發表
其實係咪好似平時燒落碟度就ok~?
無咩特別野要整?
只要你下載係ISO就無野要搞,同燒ps2 games一樣,不過Wii ISO file size係fix,4.37GB,碟(DVDR)靚機(DVD Burner)靚就好少會出問題,以下係某website推薦燒Wii用既DVDR同Burner

Taiyo Yuden DVD+R and DVD-R are best of all the medias out there.

media id/codes:

DVD-R
TYG01 = burn at 4x since they're 4x max, can be done at 8x on most burners but i don't recommend it.
TYG02 = burn at 8x (these are cheapest and most available in the US)
TYG03 = burn at 8x or 12x if burner can do it and if you have a good burner. they are 16x and will burn great at 16x so they're up to you just don't burn them below 8x, they hate it

DVD+R
YUDEN00T02 = burn at 8x can be done at 8x on most burners but i don't recommend it unless you have the best burner there is. (they are very available but double price over TYG02 in the US)
YUDEN00T03 = burn at 8x or 12x if burner can do it and if you have a good burner. they are 16x and will burn great at 16x so they're up to you just don't burn them below 8x, they hate it (these don't exist in the US yet but are widely available in europe)

the second best are

Verbatim with ring code PAPAXXXXX made by CMC using MCC id code and dyes DVD+R and DVD-R

DVD-R
MCC01RG20 = burn at 4x since it's max is 4x can be done at 8x on most burners but i don't recommend it unless you have the best burner there is
MCC02RG20 = burn at 8x since it's max is 8x can be done at 12x on most burners but i don't recommend it unless you have the best burner there is
MCC03RG20 = burn at 8x or 12x if burner can do it and if you have a good burner. they are 16x but those two lower speeds come out better and more guaranteed given their variability.

DVD+R
MCC 002 = burn at 4x since it's max is 4x can be done at 8x on most burners but i don't recommend it unless you have the best burner there is
MCC 003 = burn at 8x since it's max is 8x can be done at 12x on most burners but i don't recommend it unless you have the best burner there is
MCC 004 = burn at 8x or 12x if burner can do it and if you have a good burner. they are 16x but those two lower speeds come out better and more guaranteed given their variability.

PAP6 ring codes are prodisc made verbatims but crappier and more variable quality than cmc made verbatims. burn these the same as cmc made verbs but don't expect same quality all the time


however verbatims are variable in regards to who made them. for best results and no DREs (unless burning too low or too high or crap burners) go for Yudens.


yudens are only made in JAPAN

verbatims are made in JAPAN, INDIA, SINGAPORE, TAIWAN

verbatim and yuden fakes are made everywhere else china is one

BEST BURNERS:

Benq 1620/1640/1650/1655/18xx series
Liteon 6s series (ex 165H6s), 18aX1, and 20aX1 series
Pioneer 110/111/112 series
LG h10/h12/h22/h42 series

the rest aren't worth it and/or don't do dvd+r bitsetting to DVDROM.

a good free burn program to use is imgburn 2.2.0.0 i use this for everything works great. just open it and choose image and burn nothing else needed

thx~
剛剛買左 pioneer 112~^^

400蚊改機 .......... 一D都唔值

一定要改機先玩到???:028:

引用:
原帖由 cleanLJ 於 2007-3-2 10:25 PM 發表
400蚊改機 .......... 一D都唔值
個粒野wiikey $3xx wo............大前提,如果果粒係真野= ="

上一頁下一頁
發新話題
前往最後回覆